Quant 3D Q150 Guide de l'utilisateur télécharger pdf (Page 101)

If you elected to assign a static IP to the instrument, touch the following

fields and enter the:

• IP Address – Enter the static IP address for the instrument.

• Netmask – Enter a subnet mask for the network if applicable.

• Gateway – Enter a default gateway for the network if applicable.

Note: For each setting, touch the associated field, then enter the setting

using the keypad and touch Enter to accept the value.

Touch , then configure the domain name service (DNS) settings:

• DNS Domain – Enter the domain name of the DNS server that you

want the instrument to use.

• DNS Server – Enter the IP addresses for the primary (top) and

secondary (bottom) DNS servers.

IMPORTANT! DNS settings are required if you:

Specify the QuantStudio

3D AnalysisSuite

™

Cloud Software as a data

destination.

Want to use Network Time Protocol (NTP) for instrument date/time

synchronization.

Appendix B Networking

Connect the instrument to the network

QuantStudio

3D Digital PCR System User Guide

101

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 121 122

Pas de commentaire

Quant 3D Q150 Guide de l'utilisateur Page 101